| Processor: | 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine |
|---|---|
| RAM Size: | 512MB DDR2 RAM, 32-bit data bus, 200 MHz |
| Nand Flash: | SLC NAND Flash: 512MB |
| Interface: | One Ethernet, USB Host, USB Device, TFT LCD, Touchscreen, HDMI, Micro SD card, Audio Out, EEPROM, SDIO WiFi, UART, RTC |
| System: | Android system, Linux system, Debian, WinCE system |
| Board size: | 180mm x 130mm |
HardWare
CPU Module-CM-Tiny210V2 CPU module
- 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
- 512MB DDR2 RAM, 32-bit data bus, 200 MHz
- SLC NAND Flash: 512MB
- Two 60-pin and two 30-pin 2.0mm spaced DIP connectors for mounting to motherboard
- Ethernet Chip: DM9000AEP
- Audio Codec Chip: WM8960
- Four user LEDs (green)
- Supply voltage from 2V to 6V
- CPU module dimensions: 74x 55 x 11mm
- Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
Mother board
We provide the Tiny210V2SDK mother board(new version: Tiny210V2 SDK 1301, For old verison, click here) for CM-Tiny210V2 CPU board.
- Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
- keys: 8 key
- RJ45 Ethernet port: using DM9000AEP(On CPU board), 10/100M adaptive
- Audio input and output: using the WM8960 professional audio chip(On cpu board), containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
- USB Slave: 1 Road, the USB 2.0 specification
- USB Host: Four USB Host Interface
- Buzzer: 1, control by the PWM0
- EEPROM: AT24C08 (256 Byte) for I2C test
- LCD Interface: 2 LCD interface, support 3.5 “-19” full color TFT display LCD
- Capacitive touch screen: I2C-based interface, on the 45Pin LCD connector
- Resistive touch screen: 1-wired Touchscreen interface, On 40Pin LCD connector
- SDIO interface: used to connect the SD WiFi module and other
- CMOS Camera interface: used to connect CMOS camera
- RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
- MIPI-DSI interface
- G-sensor Support
- PCB layer: 2
- PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
- Power supply: DC-5V