CPU MODULE FET335xS-II
- Model: FET335xS-II
- CPU: TI AM3354
- Architecture: Cortex-A8
- RAM: 128M DDR3
- Flash: 256M NandFlash
- Main Frequency: 600MHz
- OS: Linux, WinCE
FET335xS-II Industrial CPU Module |
|||
|
CPU |
TI Sitara AM335x Cortex-A8 processor |
I2C |
3-ch |
|
Architecture |
ARMv7 Cortex-A8 |
SPI |
2-ch |
|
Main Frequency |
600MHz |
CAN |
2-ch |
|
RAM |
128M DDR3 |
USB HOST |
1-ch USB HOST 2.0 |
|
FLASH |
256M SLC Nandflash |
USB DEVICE |
1-ch USB DEVICE 2.0 |
|
Temp range |
-40℃-+85℃ |
SD/MMC/SDIO |
3-ch MMC |
|
Humidity |
10%～90% |
Ethernet |
2-ch Gb Ethernet port |
|
Input Voltage |
5V |
UART/IrDA |
6-ch |
|
2D/3D |
Support 2D/3D graphics acceleration |
EINT/GPIO |
Support |
|
GPU |
Power VRSGX530 |
ADC |
7-ch |
|
PMU |
TPS650250 |
Video Codec |
Software codec |
|
Size |
52mm*42mm*2.6mm |
JTAG |
1-ch |
|
Connection method |
Stamp hole |
EEPROM |
Support (Only for Encryption) |
|
OS |
Linux3.2 WinCE6.0 |
PWM |
3-ch (1-ch for self definition,1-ch for backlight,1-ch for buzzer) |
|
LCD |
RGB16bit |
SATA |
Support to connect with usb to SATA module |
|
Audio |
IIS interface |
||
OK335xS-II Industrial Base board |
|||
|
I2C |
1-ch |
RTC |
Support |
|
SPI |
1-ch |
User key |
3 |
|
CAN |
2-ch (CAN transceiver is not on the board, only can bus here) |
Boot switch |
Set to boot from Nandflash or SD card |
|
RS485 |
1-ch |
Reset |
1 |
|
SD/MMC/SDIO |
1-ch SD card |
PWM |
3-ch |
|
USB HOST |
4-ch, support USB 2.0 protocol |
LED |
2-ch |
|
USB DEVICE |
1-ch, support USB 2.0 protocol |
GPIO |
Many, multiplexed with other pins |
|
Ethernet |
1-ch 100M Ethernet port |
LVDS |
Support |
|
Serial |
4-ch (1-ch is for debugging,3-ch LVCOMS) |
SATA |
Support to connect with USB to SATA module |
|
Input voltage |
5V |
GPS |
Support to connect with external GPS module |
|
LCD |
1-ch, support resistive, capacitive touch screen; support LCD to VGA module |
3G |
Support to connect with external AD3812 module(USB) |
|
ADC |
7-ch, (2-ch is for self definition, 1-ch is for slide rheostat,4-ch is for resistive touch) |
||