ECB-916M Rev. B1.1

posted in: Carrier Boards | 0

ECB-916M Rev. B1.1

ECB-916M Rev.B11, COM Express Carrier Board

Features

  • Supports COM Express Module Rev. 2.0 Pin-out Type 1/2
  • RJ-45 x 2, Supports Gigabit Ethernet
  • VGA/ DVI-D Connector
  • 7.1 Channel Audio
  • PATA Connector x 1, SATA Port x 3 (4), CompactFlash™ Type 2 Slot x 1
  • USB Port x 5, COM Port x 2
  • PCI-Express [x16] Slot x 1, PCI-Express [x1] Slot x 1, PCI Slot x 1
  • ExpressCard Slot x 1, Mini PCI Slot x 1, Mini Card Slot x 1
  • AT/ ATX Power Input
  • LPC Connector x 1, microATX Form Factor

Specifications [ECB-916M REV. B1.1]

SYSTEM
FORM FACTOR Micro-ATX
COM EXPRESS CONNECTOR x2
I/O CHIPSET Winbond W83627DHG
FRONT PANEL CONTROL 10-pin (5×2) header
ETHERNET Intel® 82573L, 10/100/1000Base-TX, RJ-45 x 1
10/100 Base-TX or 10/100/1000Base-TX, RJ-45 x 1 (From CPU module)
EXPANSION INTERFACE PCI-Express [x1] slot x 1 (additional 2 for testing only)
PCI-Express [x16] slot x 1
==> Added a 3-pin header for SDVO enabled or disabled
PCI slot x 1
Mini-PCI slot x 1 Mini-Card slot x 1 Express Card slot x 1
POWER SUPPLY TYPE AT/ATX
CMOS BATTERY RTC battery socket x 1
BIOS SPI x 1
Firmware Hub x 1 (with DIP Switch for BIOS Selection)
BOARD SIZE 9.6” x 9.6”(243.84mm x 243.84mm)
GROSS WEIGHT 1.32 lb (0.6 kg)
OPERATING TEMPERATURE 32˚F ~ 140˚F (0˚C ~ 60˚C)
STORAGE TEMPERATURE -40˚F ~ 176˚F (-40˚C ~ 80˚C)
OPERATING HUMIDITY 0% ~ 90% relative humidity, non-condensing
MTBF (HOURS) 77000
DISPLAY
DVI/CRT DVI 29-pin + DB 15-pin stack-type connector
LVDS 30-pin (15 x 2) Dual-Channel LVDS connector x 1
SDVO 40pin (20 x 2) SDVO connector x 1
DDI
I/O
STORAGE 40-pin PATA connector x 1
SATA 3.0 Gb/s x 3
CompactFlash™ Type 2 slot x 1
SERIAL PORT RS-232 Port x 1
RS-232/422/485 Port x 1
USB Type-A connector x 4
PS/2 PORT x 1
DIGITAL I/O Supports 8-bit (Programmable)
AUDIO Audio jack x 6, support 7.1 channel audio
Audio Codec: Realtek ALC888
Buzzer x 1
SWITCH/BUTTON Power button x 1
Reset button x 1
DEBUG LED
I2C