EMB-BSW1

posted in: Mini ITX Motherboard | 0

Thin Mini-ITX Embedded Motherboard with Intel® Atom™ N3710/N3060 Processor, SATA 6.0 Gb/s x 3, USB x 10

 Features

  • Intel® Atom™ N3710/N3060 Processor
  • DDR3L 1333/1600 MHz SODIMM x 2, Up to 8 GB
  • Three Independent Display: LVDS x 1, HDMI x 2, eDP x 1
  • SATA 6.0 Gb/s x 3
  • USB 3.0 x 4, USB 2.0 x 6
  • Half-size Mini-Card (PCIe + USB) x 1, Full-size Mini-Card (mSATA default) (PCIe + USB optional) x 1
  • 12-24V DC
  • Low Profile

Specifications [EMB-BSW1]

SYSTEM
PROCESSOR Intel® Atom™ N3710 Processor, (4C @ 2.4GHz CPU (Burst Mode), 400/700 MHz GFX (Turbo), ~6W TDP),
Intel® Atom™ N3060 Processor, (2C @ 2.08GHz CPU (Burst Mode), 20/600MHz GFX (Turbo), ~6W TDP)
CHIPSET
MEMORY DDR3L 1600 MHz SODIMM x 2 up to 8 GB, Non-ECC, un-buffered memory, Dual-channel memory architecture flat type
GRAPHICS Intel® HD Graphics
I/O CHIPSET F81866D
ETHERNET Intel® i211AT x 2
AUDIO Realtek® ALC3236
TPM Infineon SLB96XX TT 1.2/2.0 (default: No)
EXPANSION SLOT Full-size Mini-Card (mSATA default) (PCIe+USB optional)x 1, Half-size Mini-Card (PCIe+USB) x 1
BIOS 64 M bit Flash ROM, AMI BIOS
H/W MONITOR Temperature Monitor on CPU/System, Voltage Monitor on Vcore/5V/3.3V/12V, Fan Monitor on Chassis
WATCHDOG TIMER 1~255 step by software program
SMART FAN CONTROL Chassis Fan (fanless)
WAKE ON LAN/ PXE Yes (WOL/PXE)
POWER STATE S3, S4, S5
GRAPHICS
GRAPHICS CHIPSET Intel® HD Graphics
GRAPHICS MULTI DISPLAY 2 HDMI + LVDS (Default), 2 HDMI + eDP (BOM Change)
VGA
DVI
HDMI Up to 2560 x 1600 @60 Hz, 3840 x 2160 @30Hz
DISPLAYPORT
LVDS Up to 1920 x 1080 @60Hz, Dual Channel 18/24-bit (via CH7511)
EDP Up to 2560 x 1440 @60Hz
BACKLIGHT CONTROL Voltage / PWM, use HW control
ENVIRONMENTAL & POWER & ME
BATTERY Lithium battery
POWER REQUIREMENT 12-24V DC (wide range: 12V-5% ~ 24V +10%)
OPERATING TEMPERATURE 32°F ~ 140°F (0°C ~ 60°C)
STORAGE TEMPERATURE -40°F ~185°F (-40°C ~85°C)
OPERATING HUMIDITY 0% ~ 90%RH, non-condensing
CERTIFICATION CE & FCC
FORM FACTOR Mini-ITX, 6.7” x 6.7” (170mm x 170mm)
WEIGHT 1.1 lb (0.5 Kg)
MTBF (HOURS)
REAR I/O PORTS
USB USB 3.0 x 2
DISPLAY I/O HDMI x 2
AUDIO I/O Mic-in x 1, Line-out x 1
LAN I/O LAN (RJ-45) port x 2
SERIAL PORT
PS/2 PORT
OTHERS DC port (12V~24V) Screw type x 1
INTERNAL I/O CONNECTORS
STORAGE SATA3 (6.0Gb/s) x 3 (1 colay with mSATA), SATA power connector x 1, Full Size Mini-Card (mSATA) x 1
USB USB 3.0 (2x10PIN, 2.00mm) x 1 port supports additional 2 USB, USB 2.0 (2x5PIN, 2.00mm) x 3 ports support additional 6 USB
DISPLAY I/O LVDS connector (40PIN, default) x 1, eDP connector (colay with LVDS, optional) x 1, LVDS 3V /5V jumper x 1, LCD DC / PWM mode jumper x 1, LCD backlight connector (inverter) x 1, LCD backlight 12V/5V jumper x 1
AUDIO I/O Speaker x 1
SERIAL PORT Boxer header for COM (RS-232) x 5, Boxer header for COM (RS-232/422/485) x 1
PS/2 PORT PS/2 Keyboard Mouse 6 PIN Connector x 1
PARALLEL PORT
DIO DIO (4in/4out) x 1
FAN Chassis Fan connector x 1
POWER 12V AUX Power Connector x 1, AT/ATX mode select jumper (optional) x 1
OTHERS Front Panel connector x 1, CMOS jumper x 1