CPU MODULE FET210
- Model: FET 210
- CPU: Samsung S5PV210
- Architecture: Cortex-A8
- RAM: 512M DDR3
- Flash: 1G SLC NandFlash
- Main Frequency: Frequency: 1GHz
- OS: Android/ Linux/ Win CE
|
FET210 CPU Module |
|||
|
CPU |
Samsung S5PV210 processor |
USB HOST |
1-ch USB HOST 2.0 |
|
Architecture |
ARMv7 Cortex-A8 |
USB DEVICE |
1-ch USB OTG 2.0 |
|
Main Frequency |
1GHz |
SD/MMC/SDIO |
2-ch |
|
RAM |
512M DDR3 |
Ethernet |
1-ch,100M/1000M self adaptive port |
|
FLASH |
1GB SLC Nandflash |
UART/IrDA |
2-ch 3-wire, |
|
Input Voltage |
5V |
EINT/GPIO |
23-ch EINT,39-ch GPIO |
|
2D/3D |
Support 2D/3D graphics acceleration |
ADC |
10-ch, 4-wire resistive touch interface is included. |
|
Graphic controller |
SGX540 |
Video Codec |
Hardware codec |
|
Size |
60mm*70mm |
EBIBUS |
16bit parallel bus |
|
Connection method |
Pin connector |
JTAG |
1-ch |
|
OS |
WinCE6.0/Linux2.6.35.7/Android 4.0/2.3 |
HDMI |
1-ch |
|
LCD |
RGB24bit |
CVBS |
1-ch |
|
Audio |
1-ch IIS interface audio interface |
Camera |
1-ch |
|
I2C |
2-ch |
PWM |
2-ch |
|
SPI |
2-ch |
||
|
OK210 Base board |
|||
|
CVBS |
1-ch |
RTC |
Support |
|
Audio |
3-ch(1-ch for phone, 1-ch for MIC,1-ch for Linein) WM8960 audio |
JTAG |
1-ch |
|
I2C |
2-ch |
ADC |
10-ch |
|
SPI |
2-ch |
User key |
8 |
|
Camera |
1-ch(support OV3640,OV9650,OV5640,TVP5150 camera) |
Boot switch |
Set to boot from Nandflash or SD card |
|
SD/MMC/SDIO |
2-ch(1-ch is for SDIO WIFI,1-ch is for SD card slot) |
Reset |
1 |
|
USB HOST |
1-ch, support USB 2.0 protocol |
PWM |
1 buzzer |
|
USB DEVICE |
1-ch,support USB2.0 protocol |
LCD |
1-ch,support resistive and capacitive LCD |
|
Ethernet |
1-ch 100M/1000M self adaptive port |
EINT |
23-ch |
|
Serial |
4-ch(2-ch 3-wire, 2-ch 5-wire) |
GPIO |
4 |
|
IR receiver |
1 |
HDMI |
1-ch |
|
Temp sensor |
DS18B20 |
SATA |
Support to connect USB to SATA |
|
Input voltage |
5V |
GPS |
Support to connect external GPS module(Serial) |
|
LED |
4-ch |
3G |
Support to connect external AD3812,MF210 |