IMBA-H61A

posted in: ATX Mother Board | 0

IMBA-H61A

ATX Industrial Motherboard with Intel® 2nd/3rd Generation Core™ i7/i5/i3/ Pentium® Processor

 Features

  • Intel® Socket 1155 for 2nd/3rd Generation Core™ Processor
  • Intel® H61 Express Chipset
  • DDR3 1066/1333 MHz DIMM x 2, Up to 16GB
  • VGA, DVI Dual independent Display
  • Realtek RTL8111F x 2, Gigabit Ethernet x 2
  • PCI-E〔x16〕x 1, PCI-E〔x1〕x 2, PCI x 4, Mini Card x 1

 Specifications [IMBA-H61A]

SYSTEM
PROCESSOR Intel® 3rd/ 2nd Generation Core™ i7/i5/i3/Pentium® / Celeron® 22nm LGA 1155 Processors
CHIPSET Intel® H61 Express Chipset
MEMORY 240-pin DIMM x 2, max. 16GB, DDR3 1333/1066/800 MHz, non-ECC, un-
buffered memory, Dual channel memory architecture
GRAPHICS
I/O CHIPSET NCT6776F
ETHERNET Realtek RTL8111F Giga LAN x 2
AUDIO Realtek® ALC887 (Colay with ALC886)
TPM 20-1 PIN header for TPM1.2/FW3.19
EXPANSION SLOT PCIe 2.0[x16] Slot x 1, PCIe 2.0 [x1] slot x 2, PCI x 4, Full/Half Size Mini-card x 1
BIOS 64Mbit Flash ROM, AMI BIOS
H/W MONITOR Temperature Monitor on CPU/System, Voltage Monitor on Vcore/5V/VBAT/12V, Fan Monitor on CPU/Chassis
WATCHDOG TIMER 1~255 steps by software program
SMART FAN CONTROL CPU Fan/ Chassis Fan
WAKE ON LAN/ PXE Yes (WOL/PXE)
POWER STATE S3,S4,S5
GRAPHICS
GRAPHICS CHIPSET Intel® HD Graphics
GRAPHICS MULTI DISPLAY VGA+DVI
VGA Up to 1920 x 1200 @60 Hz
DVI Up to 1920 x 1200 @60 Hz
HDMI
DISPLAYPORT
LVDS
BACKLIGHT CONTROL
ENVIRONMENTAL & POWER & ME
BATTERY Lithium battery
POWER REQUIREMENT 24-pin ATX connector x 1, 4-pin ATX 12V Power connector x 1
OPERATING TEMPERATURE 32°F ~ 140°F (0°C ~ 60°C)
STORAGE TEMPERATURE -40°F ~185°F (-40°C ~85°C)
OPERATING HUMIDITY 0%~90%RH, non-condensing
CERTIFICATION CE & FCC Class A
FORM FACTOR ATX Form Factor, 12″ x 9.6″ (305 mm x 244 mm)
WEIGHT 1.45 lb (0.66Kg)
MTBF (HOURS) 136599
REAR PANEL I/O PORTS
USB USB 2.0 ports x 4
DISPLAY I/O VGA x 1, DVI-D x 1
AUDIO I/O Audio Jack x 3: Line-in, Mic-in, Line-out
LAN I/O LAN (RJ-45) port x 2
SERIAL PORT DB-9 connector COM x 2 (COM2 support RS-232/422/485)
PS/2 PORT PS/2 Keyboard Connector x 1, PS/2 Mouse Connector x 1
INTERNAL I/O CONNECTORS
STORAGE SATA2 (3.0Gb/s) connector x 4
USB USB 2.0 2×5-pin connector x 2 support additional USB port x 4, USB 2.0 1 x 5-pin connector x 1 support USB port x 1
DISPLAY I/O
SERIAL PORT RS-232 header x 4
PARALLEL PORT LPT connector x 1, Support SPP/EPP/ECP Mode
DIO 8-bit Digital I/O interface x 1 (In/Out programmable)
FAN CPU Fan connector(s) (4-pin) x 1, Chassis Fan connector(s) (4-pin) x 1
POWER
OTHERS Front panel header x 1, Clear CMOS jumper x 1, TPM header x 1, BIOS flash header (2[x4]P p=1.27mm) x 1