NITX-BD1

posted in: Nano ITX Motherboard | 0

Intel® 5th Gen processor Nano-ITX Board With 2 DP, 1 LVDS and 7 USB port

 Features

  • Intel® 5th Generation ULT 15W Processor
  • Three Independent Display: Display Port x 2, LVDS Port x 1 (Optional)
  • Dual Gigabit Ethernet
  • USB 3.0 Port x 4, USB 2.0 Port x 3
  • Mini-PCIe Slot x 1, M.2 Slot x 1

Specifications [NITX-BD1]

SYSTEM
PROCESSOR Intel® 5th gen. 14nm ULT i7-5650U/ i5-5350U/ i3-5010U, BGA CPU, 15W TDP.
CHIPSET Intergrate into SoC
MEMORY SODIMM x 2, max. 16GB, DDR3L 1600 MHz, non-ECC, un-buffered memory
GRAPHICS Integrated Graphics LVDS via Chrontel CH7511, support by add on M2 module
I/O CHIPSET NCT5538D
ETHERNET Realtek 8111G Giga LAN 10/100/1000Mb LANs x 2, RJ-45 x 2
AUDIO Realtek® ALC887
TPM
EXPANSION SLOT M.2 slot (M-key) x 1, length: 60mm (mSATA colay LVDS), auto detect, Mini-Card
half size (USB+PCIe+mSATA) x 1, default USB+PCIe, mSATA BOM change
BIOS 128M bit Flash ROM, AMI BIOS
H/W MONITOR Temperature Monitor on CPU/System, Voltage Monitor on Vcore/5V/3.3V/12V,
Fan Monitor on Chassis
WATCHDOG TIMER 1~255 steps by software program
SMART FAN CONTROL Chassis Fan
WAKE ON LAN/ PXE Yes (WOL/PXE)
POWER STATE S3, S4, S5
GRAPHICS
GRAPHICS CHIPSET Integrated Graphics, LVDS via Chrontel CH7511, support by add on M2 module
GRAPHICS MULTI DISPLAY DP1+DP2+LVDS, DP1+DP2, LVDS+DP1, LVDS+DP2
VGA
DVI
HDMI
DISPLAYPORT DP 1.2a (U): 3840 x 2160, (H): 4096 x 2304
LVDS 1920 x 1200
EDP
BACKLIGHT CONTROL Yes
ENVIRONMENTAL & POWER & ME
BATTERY Lithium battery
POWER REQUIREMENT DC power jack x 1 (DC: 12V~19V, wide rage: 12V-5%~ 19V+10%)
OPERATING TEMPERATURE 32°F ~ 131°F (0°C ~ 50°C)
STORAGE TEMPERATURE -40°F ~185°F (-40°C ~85°C)
OPERATING HUMIDITY 20% ~ 90% RH, non-condensing
CERTIFICATION CE & FCC class A
FORM FACTOR NANO ITX: 120mm x 120mm (4.72″ x 4.72″)
WEIGHT
MTBF (HOURS) 434910
FRONT PANEL I/O PORTS
USB USB 3.0 port x 2, USB 2.0 port x 2, USB header support USB 2.0 port x 1 (p=2.00mm)
DISPLAY I/O
AUDIO I/O Audio jack x 2: Line-out (green), Mic-in (pink)
LAN I/O
SERIAL PORT
PS/2 PORT
OTHERS On/Off Button x 1, Power LED + HD LED x 1
REAR PANEL I/O PORTS
USB USB 3.0 port x 2
DISPLAY I/O DP connector x 2
AUDIO I/O
LAN I/O RJ-45 connector x 2
SERIAL PORT
PS/2 PORT
OTHERS Reset Switch x 1, DC power jack x 1, Antenna output x 1 (from internal Mini- Card)
INTERNAL I/O CONNECTORS
STORAGE SATA 6.0 Gb/s port x 1, M.2 slot for mSATA x 1 (optional)
USB USB header support USB 2.0 port x 1 (p=2.00mm)
DISPLAY I/O LVDS connector x 1, support by add on M.2 module
AUDIO I/O
SERIAL PORT COM port header x 1, p=2.00mm (RS-232)
PS/2 PORT
PARALLEL PORT
DIO
FAN Chassis Fan connector x 1 (3-pin, p=2.00mm)
POWER SATA power connector x 1, support by add on M.2 module, int. 2-pin reset switch x 1, int. 2-pin power switch x 1,
OTHERS Mini-Card half size x 1 (USB+PCIe+mSATA, default USB+PCIe, mSATA BOM change), LVDS inverter x 1, support by add on M.2 module