Intel® Atom™ Bay Trail In-Vehicle Fanless Computer with 2x IEEE 802.3at PoE+ Ports
- Intel® Atom™ Bay Trail E3845 quad-core processor
- Dual mPCIe and USIM sockets for 3G, LTE, WLAN, BT or GPS modules
- Dual storage with 1x mSATA and 1x SATA
- Intelligent ignition power control
- 1x CAN bus port with compliance to CAN bus 2.0A and CAN 2.0B
- 8 to 35VDC wide-range DC input
- Operating temperature from -25° to 70°C
- Patented damping bracket for in-vehicle installation(R.O.C Patent No.M491752)
- E-Mark certificate (E13 No. 10R-0513905)
Product Highlights
High Value Fanless Computer
Equipped with Intel® Bay Trail quad-core processor, Nuvo-2510VTC shows much higher performance than previous Atom D2550 computers. This provides adequate computing power for many light-weight applications with reasonable cost. With TDP, thermal design power, of the on-board processor is only 10W, as well as the wide range DC input, Nuvo-2510VTC is also good for battery-powered applications. Moreover, many value-added features, such as shock-absorbing mounting, ignition power control, wide operating temperature, wide-range DC input, are designed in. Whether for in-vehicle or general purpose applications, Nuvo-2510VTC is really a high value industrial fanless computer.
2x IEEE 802.3at PoE+ Ports
Nuvo-2510VTC integrates 2 Gigabit PoE+ PSE ports compliant with IEEE 802.3at standard. Each port can deliver power up to 25.5W and simultaneously transfer data up to 1000 Mb/s over a single CAT-5e/CAT-6 cable. The built-in PoE+ ports support per-port on/off. The per-port on/off feature allows you to reset the connected PoE PD devices. The highly integrated design, moreover, allows Nuvo-2510VTC to effectively manage the heat which PoE circuit generates and consequently makes Nuvo-2510VTC a very stable fanless computer equipped with PoE+ PSE ports.
Built-in CAN bus Port
CAN bus is a vehicle bus standard allowing the in-vehicle devices to communicate with each other without a host and is widely used in different vehicles nowadays. Nuvo-2510VTC provides built-in CAN bus port. The built-in CAN bus supports the bit rate up to 1Mbps and both CAN2.0A and CAN2.0B. These two frame formats forms the Data Link Layer and Physical Layer of many CAN-based HLP, Higher Layer Protocols, such as ISO TP, J1939 and OBD. The built-in CAN bus is provided with SDK facilitating sending and receiving CAN bus messages with configurable CAN bus identifier. By assigning different identifier and data byte, Nuvo-2510VTC is possible to handle different CAN-base HLPs.
Specification
System Core |
|
|---|---|
| Processor | Intel® Atom™ Bay Trail E3845 Quad-core Processor (1.91 GHz, 2M cache) |
| Chipset | Integrated Intel® HD Graphics |
| Graphics | Integrated Intel® HD Graphics Controller |
| Memory | 1x 204-pin SO-DIMM socket,up to 8GB DDR3L 1333MHz SDRAM |
Front Panel I/O Interface |
|
|---|---|
| PoE Port | 2x IEEE 802.3at (25.5W) Gigabit Ethernet ports by Intel I210 |
| Video Port | 1x DB-15 connector for analog RGB,supporting 2560 x 1600 resolution |
| Serial Port | 2x software-programmable RS-232/422/485 (COM1 & COM2) |
| USB | 1x USB 3.0 port and 3x USB 2.0 ports |
| Power Input | 1x 3-pin pluggable terminal block for ignition signal and DC input |
Back Panel I/O Interface |
|
|---|---|
| Video Port | 1x DVI-I connector with DVI-D output, supporting 2560 x 1600 resolution |
| Audio Port | 1x Mic-in, 1x Speaker-out |
| Series Port | 2x RS-232 (COM3 & COM4) |
| CAN Bus | 1x DB-9 connector for CAN bus communications |
Storage Interface |
|
|---|---|
| SATA HDD | 1x Internal SATA port for 2.5” HDD/SSD installation |
| mSATA | 1x internal half-sized mSATA (SATA + USB) |
Expansion Bus |
|
|---|---|
| Mini PCI-E | 1x full-sized mini PCI Express socket with USIM socket (PCIe + USB) 1x full-sized mini PCI Express socket with external USIM socket (USB) |
Power Supply |
|
|---|---|
| DC Input | 8~35V DC input |
Mechanical |
|
|---|---|
| Dimension | 205 mm (W) x 146 mm (D) x 44 mm (H) |
| Weight | 1.9 kg (including one 2.5″ HDD and DDR3 SO-DIMM) |
| Mounting | Patented shock-absorbing wall-mounting (standard) or DIN-Rail mounting (optional) |
Environmental |
|
|---|---|
| Operating Temperature | -25°C ~ 70°C with SSD, 100% CPU loading */** -10°C ~ 50°C with HDD, 100% CPU loading */** |
| StorageTemperature | -40°C ~ 85°C |
| Humidity | 10%~90% , non-condensing |
| Vibration | Operating, 5 Grms, 5-500 Hz, 3 Axes(w/ SSD, according to IEC60068-2-64) |
| Shock | Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27) |
| EMC | CE/FCC Class A, according to EN 55022 & EN 55024 |