FET335xD Industrial CPU Module |
|||
CPU |
TI Sitara AM335x Cortex-A8 processor |
I2C |
3-ch |
Architecture |
ARMv7 Cortex-A8 |
SPI |
2-ch |
Main Frequency |
800MHz |
CAN |
2-ch |
RAM |
512M DDR3 |
USB HOST |
1-ch USB HOST 2.0 |
FLASH |
256M SLC Nandflash |
USB DEVICE |
1-ch USB DEVICE 2.0 |
Input voltage |
5V |
SD/MMC/SDIO |
3-ch MMC |
2D/3D |
Support |
Ethernet |
2-ch Gb Ethernet port |
GPU |
PowerVRSGX530 |
UART/IrDA |
6-ch |
Hardware watchdog |
SP706SEN |
EINT/GPIO |
Support |
PMU |
TPS65217C |
ADC |
8-ch |
Size |
46mm*70mm |
Video Codec |
Software codec |
Connection method |
Pin connector |
EBI |
16 bit data bus, 12bit address bus |
OS |
Linux3.2/Android4.2/WinCE7.0/WinCE6.0/StarterWare |
JTAG |
1-ch |
LCD |
RGB16bit |
EEPROM |
Support (Only for Encryption) |
Audio |
IIS interface |
PWM |
1-ch (For backlight ) |
OK335xD Industrial Base board |
|||
Audio |
3-ch(1-ch phone,1-ch MIC,1-ch speaker) |
JTAG |
1-ch |
I2C |
2-ch |
RTC |
Support |
SPI |
1-ch |
User key |
6 |
CAN |
1-ch(With isolation protection) |
Boot switch |
Set to boot from Nandflash or SD card |
RS485 |
1-ch (With isolation protection ) |
Reset |
1 |
SD/MMC/SDIO |
2-ch(1-ch SDIO WIFI,1-ch SD card slot) |
PWM |
1-ch(For LCD backlight) |
USB HOST |
4-ch, support USB 2.0 protocol |
LED |
4-ch |
USB DEVICE |
1-ch, support USB 2.0 protocol |
GPIO |
More than 20-ch |
Ethernet |
1-ch gigabit Ethernet port |
EBI |
Support 12 bit address bus,16 bit data bus |
Serial |
3-ch (2-ch RS232, 1-ch TTL) |
SATA |
Support to connect with USB to SATA module |
Input voltage |
5V |
GPS |
Support to connect with external GPS module |
LCD |
1-ch, support resistive, capacitive touch screen; support LCD to VGA module |
3G |
Support external AD3812 module(USB) |
ADC |
8-ch, in which 4-ch are used for resistive touch, 4-ch is used for self definition by users. |
LVDS |
Support |