FET335xS Industrial CPU Module |
|||
CPU |
TI Sitara AM335x Cortex-A8 processor |
I2C |
3-ch |
Architecture |
ARMv7 Cortex-A8 |
SPI |
2-ch |
Main Frequency |
800MHz |
CAN |
1-ch |
RAM |
512M DDR3 |
USB HOST |
1-ch USB HOST 2.0 |
FLASH |
256M SLC Nandflash |
USB DEVICE |
1-ch USB DEVICE 2.0 |
Temp range |
-40℃-+85℃ |
SD/MMC/SDIO |
3-ch MMC |
Humidity |
10-90%(Non-condensation) |
Ethernet |
2-ch Gb Ethernet port |
Input voltage |
5V |
UART/IrDA |
6-ch |
2D/3D |
Support |
EINT/GPIO |
More than 20-ch |
GPU |
PowerVRSGX530 |
ADC |
7-ch |
PMU |
TPS65217C |
Video Encoder |
Software codec |
Size |
52mm*42mm |
JTAG |
1-ch |
Connection type |
Half-hole soldering |
EEPROM |
Support (Only for Encryption) |
OS |
Linux3.2/Android4.2/WinCE7.0/WinCE6.0/StarterWare |
PWM |
2-ch (1-ch for backlight ) |
LCD |
RGB24bit |
SATA |
None(Suppot USB to SATA) |
Audio |
IIS interface |
OK335xS Industrial Base board |
|||
Audio |
3-ch(1-ch phone,1-ch MIC,1-ch line in) |
JTAG |
1-ch |
I2C |
1-ch |
ADC |
5-ch (4-ch is for resistive touch, 1-ch is for slide rheostat) |
SPI |
1-ch |
User key |
5 |
CAN |
1-ch |
Boot switch |
Set to boot from Nandflash or SD card |
RS485 |
1-ch,multiplexed with Profibus |
Reset |
1 |
SD/MMC/SDIO |
1-ch SD card |
PWM |
2-ch(1-ch is for LCD backlight,1-ch is for buzzer) |
USB HOST |
4-ch, support USB 2.0 protocol |
LED |
1-ch |
USB DEVICE |
1-ch, support USB 2.0 protocol |
GPIO |
More than 20-ch |
Ethernet |
2-ch gigabit Ethernet port |
RTC |
Support |
Serial |
4-ch (3-ch RS232, 1-ch TTL) |
SATA |
Support to connect with USB to SATA module |
Input voltage |
5V |
GPS |
Support to connect with external GPS module |
LCD |
1-ch, support resistive, capacitive touch screen; support LCD to VGA module, LCD to LVDS module |
3G |
Support external AD3812 module(USB) |