Industrial grade Gateway/IoT Linux Yocto single board computer i.MX6UL development kit
- Model: OKMX6UL-C2
- CPU: i.MX6Ultra Lite
- Architecture: Cortex-A7
- RAM: 256M DDR2
- Flash: 256M SLC NandFlash
- Main Frequency: 528MHz
- OS: Linux
| FETMX6UL-C2 CPU Module Features | |||
| CPU | NXP (Freescale) i.MX6UL | CAN | 2-ch |
| Architecture | Cortex-A7 | USB | 2-ch |
| Main Frequency | 528MHz | SD/MMC/SDIO | 2-ch |
| RAM | 256M LvDDR3 | Ethernet | 2-ch, 10/100/1000M |
| Flash | 256MB NAND Flash | UART/IrDA | 8-ch |
| Working Voltage | 5V | EINT/GPIO | supported |
| GPU | PXP | Video Codec | Software codec |
| Dimension | 50mm * 40mm | EBI | supported |
| Connection Type | board-to-board connectors | JTAG | Supported |
| OS | Linux 3.14.38 | Camera | 1-ch, 5M parallel camera |
| LCD | RGB888 | PWM | 8-ch |
| Audio | 3-ch | ADC | 10-ch |
| I2C | 4-ch | ISO7816-3 | 2-ch |
| SPI | 4-ch | Keypad | 8*8 |
| QSPI | 1-ch | SPDIF | 1-ch |
| OKMX6UL-C2 Carrier Board Features | |||
| LCD | 1-ch, RGB 565 | PWM | 1-ch, for LCD backlight |
| USB Host | 1-ch, USB 2.0 | ADC | 4-ch, for resitive touching |
| USB OTG | 1-ch, USB2.0 | UART | 4-ch (2x 5-wire, 2x 3-wire) |
| Ethernet | 1-ch, 10/100Mbps, RJ-45 | UART Debug | 1-ch, DB9 |
| SD Card | 1-ch, SD/SDHC/SDXC(UHS-I) | JTAG Debug | 1-ch |
| LED | 4-ch | GPIO | Supported |
| Reset | 1-ch | Power Supply | 5V |
| RTC | Supported | DIP | boot mode selection |
