| Processor: | ARM9 @ 400Mhz on Atmel AT91SAM9X25 |
|---|---|
| RAM Size: | 128MB DDR2 |
| Nand Flash: | 256MB Nand Flash |
| Interface: | Two Ethernet, Two USB Host, USB Device, CAN BUS 2.0, SDIO SD card, UART, SPI, 2x I2C, GPIO, A/D, Watchdog, RTC |
| System: | Linux system |
| Board size: | 115mm x 74mm |
HardWare
CPU Board:CM-SAM9X25
- Dimensions: 57*39mm, 8 layer
- Working Temperature: -40 to +85 Celsius
- Atmel AT91SAM9X25 ARM926EJ-S Core Microprocessor
- 128MByte DDR2 RAM, 256MByte Flash, 4kbit EEPROM
- Two 100Pin connector extend more function
- Expand two Ethernet, Two CAN Bus, Serial port
- Software Modem,USB Host/Device, SDIO, TWI, SPI
Mechanical Parameters
- Dimensions:115*74mm
- Power Input Voltage: 12V
- Temperature Range: -40 ℃ ~ 85 ℃
- Humidity Range: 20% ~ 90%
Data Transfer Interface
- Serial port
- DEBUG: One 3-wire TTL Debug serial port(provide TTL_RS232 module)
- COM0: One 5-wire TTL serial port, Support extend RS232/RS485 Module
- Ethernet: Two 10/100Mbps Ethernet port (RJ45)
- USB port:
- Two High-speed USB 2.0 Host port, 480Mbps
- One High-speed USB 2.0 Device port, 480Mbps
- TF card slot: One TF card interface(Hot plug-and-play)
- Zigbee interface
- Soft Modem interface
- Expansion Interface
- J1:3 x Uart, 1 x SPI, 4 x GPIO
- J3: 6 x AD, 4 x PWM, 1 x Uart
- J4: 6 x IO, 1 x USB, 1 Soft Modem
- J5: JTAG, 2 x SPI, 1 x SSC, 1 x TWI
- Input Interface
- 1 LED: 1 x Power LED
- 2 Button: 1 x Reset KEY, 1 User Key
- Support Linux 2.6.39 System
- UBI Filesystem
- CAN bus driver
- Ethernet Driver, Telnet, TCP/IP
- USB Host, Soft Modem