Freescale(NXP) i.MX6UL Embedded Linux Single Board Computer Low power Linux Yocto ARM Cortex-A7 with528MHz/512M LvDDR3, 4G eMMC
- Model: OKMX6UL-C1
- CPU: NXP(Freescale) i.MX6Ultra Lite
- Architecture: Cortex-A7
- RAM: 512M LvDDR3
- Flash: 4G eMMC (8G optional)
- Main Frequency: 528MHz
- OS: Linux
i.MX6UL CPU Module Features |
|||
| CPU | NXP i.MX6UL | CAN | 2-ch |
| Architecture | Cortex-A7 | USB DEVICE | 2-ch |
| Main Frequency | 528MHz | SD/MMC/SDIO | 2-ch |
| RAM | 512MB LvDDR3 | Ethernet | 2-ch, 10/100M Ethernet |
| Flash | 4GB eMMC | UART/IrDA | 8-ch |
| Working Voltage | 5V | EINT/GPIO | Supported |
| GPU | PXP | Video Coder | Software codec |
| Dimentions | 50mm*40mm | EBI BUS | Supported |
| Connection Type | Board-to-board pin connectors | JTAG | Supported |
| OS | Linux 3.14.38 | CAMERA | 1-ch, 5.0M Megapixel parallel interface |
| LCD | RGB 24-bit | PWM | 8-ch |
| AUDIO | 3-ch | ADC | 10-ch |
| I2C | 4-ch | ISO7816-3 | 2-ch |
| SPI | 4-ch | Keypad Port | 8*8 |
| QSPI | 1-ch | SPDIF | 1-ch |
i.MX6UL Carrier Board Features |
|||
| AUDIO | 1x Phone,1x MIC, 2x Speaker | JTAG | Supported |
| I2C | 2-ch, pinned out | ADC | 4-ch for resistive touching |
| SPI | Supported | DIP | 8 |
| CAN | 2-ch | Reset | 1 |
| CAMERA | 1-ch, 5MP parallel interface camera, OV5640 | PWM | 1-ch for LCD backlight |
| SD/MMC/SDIO | 1 | LCD | 1-ch for 7” resistive LCD |
| USB Host | 3x USB2.0 Host | EINT | Supported |
| USB Device | 1x USB micro 2.0 device | GPIO | Supported |
| Ethernet | 2x 10/100M Ethernet, RJ45 | EBI BUS | Supported |
| Serial Port | 3-ch, pinned out | WiFi&BT | 1 |
| Power adapter | 5V | GPS | Serial port GPS module |
| LED | 4x LED | 3G | USB 3G module |
| RTC | Supported | ||