WiFiG25 Module

posted in: atmel series board | 0

Processor: ARM9 @ 400Mhz on Atmel AT91SAM9G25
RAM Size: 128MB/256MB DDR2
Nand Flash: 256MB Nand Flash
Interface: WiFi, USB Device, Watchdog, 40Pin connertor expand the UART, SPI, I2C, 60x GPIO, A/D,
System: Linux system, Debian
Board size: 50mm x 30mm

Main Features

  • CPU: ARM9 @ 400Mhz on Atmel AT91SAM9G25
  • RAM: 128 or 256 MByte DDR2
  • Flash: 256MB Nand Flash
  • WiFi Module on board with internal antenna
  • USB: up to 2 host ports:
    • one hi-speed host/device
    • one full-speed
  • UART: up to 3 serial lines
  • I2C: up to 1 I2C buses
  • SPI: up to 1 SPI buses
  • PWM: up to 6 lines
  • GPIO: up to 27 GPIO lines
  • A/D: up to four channel @ 10 bit

Mechanical Parameters

  • Power supply: single at 5 Volt DC
  • Consumption: see consumption…
  • Line level: TTL 3.3V
  • Temperature range: 0-70 °C and -20 to +85 °C (-I version)
  • Size: 50 x 30 mm
  • Placement for 20×2 pitch 2,54mm (100mils) pinstrip (not included)
  • Weight: 5g
  • PCB layers: 6
  • User configurable led on board

Other features

  • OS boot from Nand Flash or SD card
  • RoHS and REACH compliant.
  • Low EMI.
  • Availability: > 10 years(To 2023)
  • Flat price up to 10K pcs
  • No MOQ

Software Feature

  • Bootloader support(Support update the system by TF Card, USB Disk and Ethernet)
  • Linux kenel version: Linux 3.6.9
  • Buildroot rootfs provided(pre-install in the Nand FLash)
    • DHCP, SSH, Telnet, Test Demo Support
    • The Expand interface demo provide
    • Fully open source firmware, software environments and toolchains available from Atmel sites
  • Debian system provided(Need boot from SD/TF card)
    • Thousands of Open Source applications available from the Debian repositories
    • Almost all programming language available
    • C, Python, Perl and PHP already installed on the factory default microSD for in-board development
  • All the Bootloader/Linux Kernel Source code and system images provide

Development Reference